Skip to content

Free Sheet-Goods Layout Planner · Inches & Millimeters

Plywood Cut Optimizer

Enter your panel dimensions, quantity, and table saw blade kerf to generate visual 4×8 ft or metric cutting maps and see how many sheets of plywood you need before heading to the lumberyard.

1. Sheet Size & Saw Kerf

2. Required Parts

Sheets Needed

2

Parts Placed

10

Sheet Yield

67%

Offcut Waste

33%

Live SVG LayoutKerf allowance: 0.125"

Sheet #1 · 48 × 96"

7 cuts · 79% utilized
Top Deck24×40 ↻Back Panel34×38.5 ↻Bottom Shelf23×38.5 ↻Drawer Sides6×20Drawer Sides6×20Drawer Sides6×20

Sheet #2 · 48 × 96"

3 cuts · 55% utilized
Bottom Shelf23×38.5 ↻Side Panels24×34 ↻Side Panels24×34 ↻

Shop tips for cleaner plywood breakdown

Always break down full 4×8 ft sheets along the long rip lines first, leaving 1/8 inch extra if you plan to trim factory edges clean on the table saw.

Need help reading cut lists or planning solid lumber too? Read our cut list reference guide or switch to our Board Foot Calculator.

What saw blade kerf should I enter for plywood?
Standard full-kerf 10-inch table saw blades remove 1/8 inch (0.125 in / 3.2 mm) per cut. Thin-kerf circular saw and track saw blades typically remove 3/32 inch (0.094 in / 2.4 mm).
When should I turn off 90° rotation for a panel?
Uncheck Rotate whenever face-veneer wood grain direction must run consistently along the length of the part, such as cabinet doors, visible end panels, or stained plywood shelves.
Do your paid PDF woodworking plans already include cutting diagrams?
Yes. Our PDF woodworking manuals include pre-calculated board-by-board cutting diagrams with 1/8 inch kerf allowance already mapped out for standard lumberyard stock.

Plans using sheet goods

Ready-to-cut workshop & cart plans

Your Cart

Your cart is empty

Add any PDF woodworking plan to check out in seconds.

Browse plans →