Skip to content
Outdoor & Garden7 min readUpdated November 15, 2026

Planning an 8x10 Garden Shed: Skids, Floor Joists, and Roof Pitch

How compacted gravel pads, pressure-treated 4x4 skids, 16-inch on-center floor joists, and gable rafters work on an 8x10 backyard shed.

Reference blueprint: EWD-006 · Water Tank Shed & Rainwater Collection Plans (110 in W × 53 1/2 in D × 79 1/16 in H / 2,794 mm W × 1,359 mm D × 2,008 mm H)

Why 8x10 ft (2.44 x 3.05 m) is the sweet spot for backyard sheds

An 8×10 ft footprint (80 sq ft / 7.43 m²) uses full 4×8 ft (1,220 × 2,440 mm) plywood or OSB subfloor and siding sheets with minimal ripping, fits under the 100 sq ft permit threshold in many jurisdictions, and still holds a riding mower, garden tools, and wall shelving.

Building a dry, level skid foundation

Even the best wall framing will twist if the corners settle unevenly. The cleanest non-permanent foundation for an 8×10 shed is a compacted crushed-stone pad extending 12 in (305 mm) beyond the footprint on all four sides:

  • Perimeter border: 4×4 or 4×6 ground-contact pressure-treated timbers pinned with rebar.
  • Fill: 4 in (100 mm) of compacted 3/4 in (19 mm) crushed stone with fines (crusher run), leveled with a long screed board.
  • Floor skids & joists: Two or three 4×4 treated skids supporting 2×6 floor joists spaced 16 in (406 mm) on center, topped with 3/4 in (19 mm) tongue-and-groove subfloor panels glued and screwed to the joists.

Free sample blueprint

Want a sample PDF plan for your shop clipboard?

Get our free sample woodworking blueprint with dual imperial and metric measurements, cut list, and 3D assembly views sent to your email.

Get the free sample plan

Ready-to-build PDF plans

Matching woodworking blueprints

Browse all Outdoor & Garden plans →

Your Cart

Your cart is empty

Add any PDF woodworking plan to check out in seconds.

Browse plans →